SimironRegional · 78 mi from Tracy
Epoxy & resin supply in Mill Valley.
Field-tested material shipped from our Tracy bench to Mill Valley and the rest of Marin. Fast regional shipping or pickup, local pickup, and contractor pricing.
Fast regional shipping or pickup
Serving mill valley
What we ship to Mill Valley
From garages to commercial kitchens, the floors going down across Mill Valley all start with the same decision, namely what material to trust. We make that decision easier with a shelf that has already been tested for you.
Our shelf pulls from several trusted manufacturers, which lets us put the right epoxy, polyaspartic or metallic line on a job in Mill Valley without forcing everything through one brand. What ties the lineup together is the test: the owner ran each product on a real pour before it got a spot, and anything that let him down on the slab did not make the cut.
Not everyone ordering to Mill Valley has poured a given system before, and that is fine. Tell us it is your first metallic floor or your first flake garage and we will size the order and walk through the steps with that in mind, and point you to training if you want more than a phone call. Seasoned crews get the same help with the math: give us the square footage and the finish, and we will work out coverage and quantities for each layer. Beginners and longtime installers both end up with a complete stack that was tested together.
Proven material, a straight answer, and it gets to Mill Valley. That is the whole job.
From the catalog
On the shelf for this job
On the truck
The lines we ship to Mill Valley.
Every one of these was run on a real pour before it earned shelf space. Browse a line, then call the bench with the slab and the quantities and we will spec it for the job.
Epoxy Systems
100% solids base and build coats, the structural body under most floors.
Polyaspartic Coatings
Fast-cure, UV-stable topcoats and one-day systems for crews on a clock.
Metallic Flooring Systems
Metallic pigments, bases and clears for floors that move under the lamp.
Decorative Flake
House-blended flake in stock colors and custom mixes, by the box or the bag.
Quartz Broadcast
Graded, kiln-dried quartz for double-broadcast floors that take real abuse.
Moisture Vapor Barrier
MVB primers that seal a green or damp slab before the finish goes down.
Tooling, Prep & Consumables
Diamond tooling, rollers, squeegees, mixing gear, silica and aggregates.
Before you order
Four things that decide the floor.
Get these four right and most of the trouble on a resin floor never shows up. If you are unsure about any of them on a job in Mill Valley, call before the order goes in and we will work it out with you.
Test the slab first
An old slab and a new one can both carry moisture you cannot see. Test before you pour and we will add a barrier to the order if the result calls for one.
Order the whole system
Give us the square footage and the look, and we will size every layer from base to topcoat so nothing runs short mid-pour.
Do not skip the prep kit
Ask us for a prep list with your order. Tooling, rollers, squeegees, mixing supplies and aggregate get sized to the job.
Plan your delivery
From Mill Valley the freight is quick, but plan a little lead time on big pallet orders so the schedule does not wait on the truck.
On the map
Mill Valley, and the rest of Marin.
Mill Valley is one of the markets we supply across Marin County. Same shelf, same field-tested lines, same person on the phone. See the rest of the county, or talk to the owner about your job.
Questions from the bench
Supplying Mill Valley, answered.
Do you ship epoxy to Mill Valley?
Yes. An easy run from Tracy. Freight is quick and pickup is worth the drive for a big order. Mill Valley is about 78 road miles from our Tracy bench, in Marin, and we ship there regularly for contractors and serious DIY pros alike.
Can I pick up in Tracy instead?
Yes. Pickup is handy when a job comes up short, say an extra kit of topcoat or more silica to finish a broadcast. Call ahead so we can stage it, then swing by and load up.
Do you have contractor pricing for Mill Valley crews?
Yes. Tell us your typical volume and we will set up terms. Regular orders get the best pricing.
Are you a flooring contractor?
No. We sell resinous flooring systems and teach people how to install them through our training academy. If you came here looking for someone to coat your garage, ask us. The owner takes a select few installs himself, and otherwise we will point you to a trained installer who buys from us and has someone to call when the job gets difficult.
What should a Mill Valley installer start with?
A moisture test. Before you pick a color or a system, find out what the slab is doing, then call us with the reading and we will build the stack from there.
Rooted here
Tracy, California, and proud of it.
Veteran-managed, and we hire veterans. That shows up in how carefully orders get checked and packed before they leave the valley. The local ties are real too: we are members of the Lathrop Chamber of Commerce and sponsors of Lathrop Little League and the Junior Spartans.
We ship coast to coast. This bench is still home.
Set up an account
Stock the way you work.
A one-off floor and a crew pouring garages every week should not buy the same way. These three tiers are where the conversation starts, and the actual order and checkout happen in our shop.
Job Kit
Per JobFor the one-off floor
- Everything for a single pour
- Matched base, color and topcoat
- Owner walks you through it
- Ships nationwide, or pick up in Tracy
Pro Crew
VolumeFor the working installer
- Volume pricing across every line
- Priority on the bench
- First look at new systems
- Seat at the training academy
Shop Account
WholesaleFor the crew that runs daily
- Standing wholesale terms
- Custom flake blends to spec
- Stock held for your schedule
- Direct line to the owner
Get in touch
Tell us what you're pouring.
Anything from one bucket to a standing wholesale account, pickup or freight, or a seat in training. A person who has poured this material reads every message.
- (209) 208-4656
- chris@exclusiveresinsupply.com
- 392 W Larch Rd, Suite 11, Tracy, CA 95304
Putting a floor down in Mill Valley?
Tell the owner the slab, the look, and your quantities. We will spec it and get it to you.
Need it installed?
Our sister company, Exclusive Resins, installs epoxy, flake and metallic floors across the Central Valley, out of the same Tracy building.