SimironRegional · 65 mi from Tracy
Epoxy & resin supply for San Francisco County.
Field-tested material, shipped from our Tracy bench to San Francisco and across San Francisco. Fast regional shipping or pickup, local pickup, and contractor pricing for crews that order regularly.
Fast regional shipping or pickup
Serving san francisco
Built for the work in San Francisco
If you pour floors in San Francisco County, the question is never whether good material exists. It is whether you can get it without a four-week lead time and a guess. We exist to take that guess out of the order.
Commercial work in San Francisco brings its own demands: wet floors, hot water, chemicals and heavy traffic. Urethane cement and quartz broadcast systems are built for that, and we stock both alongside the residential lines. Tell us what the room goes through every day and we will match the system to it.
Before any resin heads to a job in San Francisco, we want to know what the slab is doing. A moisture test takes little time and tells you whether the floor needs a vapor barrier under the system, and skipping it is how good material ends up lifting off a damp slab. If the numbers come back high, we add a moisture vapor barrier to the order and adjust the stack to suit. If they come back clean, you go ahead with the system as specced. Either way, the test and the prep tooling belong in the order from the start, because the slab has more say in how long a floor lasts than the topcoat does.
We are the supplier. You are the floor. We make sure the material never lets you down.
From the catalog
On the shelf for this job
On the truck
The lines we ship to San Francisco.
Every line below ships from one bench, picked by someone who has put it down himself. Browsing is fine for ideas, but the fastest way to get the order right is a phone call where we talk through the slab, the look and how much you need.
Epoxy Systems
100% solids base and build coats, the structural body under most floors.
Polyaspartic Coatings
Fast-cure, UV-stable topcoats and one-day systems for crews on a clock.
Metallic Flooring Systems
Metallic pigments, bases and clears for floors that move under the lamp.
Decorative Flake
House-blended flake in stock colors and custom mixes, by the box or the bag.
Quartz Broadcast
Graded, kiln-dried quartz for double-broadcast floors that take real abuse.
Moisture Vapor Barrier
MVB primers that seal a green or damp slab before the finish goes down.
Tooling, Prep & Consumables
Diamond tooling, rollers, squeegees, mixing gear, silica and aggregates.
Before you order
Four things that decide the floor.
Get these four right and most of the trouble on a resin floor never shows up. If you are unsure about any of them on a job in San Francisco, call before the order goes in and we will work it out with you.
Test the slab first
Find out how much moisture the concrete is holding before the resin goes down. A quick reading tells us whether your system needs a vapor barrier underneath.
Order the whole system
Give us the square footage and the look, and we will size every layer from base to topcoat so nothing runs short mid-pour.
Do not skip the prep kit
Grinding opens the slab so the base coat can grab. Order the diamond tooling with the resin so the grinder is ready on day one.
Plan your delivery
From San Francisco the freight is quick, but plan a little lead time on big pallet orders so the schedule does not wait on the truck.
On the map
What we ship to San Francisco
Our shelf pulls from several trusted manufacturers, which lets us put the right epoxy, polyaspartic or metallic line on a job in San Francisco without forcing everything through one brand. What ties the lineup together is the test: the owner ran each product on a real pour before it got a spot, and anything that let him down on the slab did not make the cut.
Cities in san francisco
Where we ship in San Francisco.
Questions from the bench
Supplying San Francisco, answered.
Do you deliver to San Francisco?
Yes. An easy run from Tracy. Freight is quick and pickup is worth the drive for a big order. San Francisco is about 65 road miles from our Tracy bench, and we run material out there regularly for the crews working that market.
Can I pick up instead of shipping?
Local pickup at the Tracy bench is always open. Reach out first and we will stage your order so it is ready when you arrive, and for a large order the drive is usually worth it to skip the freight.
Do you offer contractor pricing in San Francisco?
Yes. Tell us what you run and your typical volume and we will set up terms. Crews that order regularly get the best pricing.
Do you install floors?
No. We are a supply house and training academy, not a flooring contractor. We get you the proven material and the know-how; you or your crew lay the floor. If you want to learn the systems hands-on, that is exactly what the academy is for.
What sells most in San Francisco?
Epoxy build coats and polyaspartic topcoats move constantly, with metallics and flake close behind. Tell us the slab and we will point you to the right line.
Rooted here
Tracy, California, and proud of it.
Our seat in the Lathrop Chamber of Commerce keeps us answerable to the businesses down the road. We sponsor Lathrop Little League and the Junior Spartans because those families live here too. Freight goes out nationwide, and every box still starts on the bench in the valley.
We ship coast to coast. This bench is still home.
Set up an account
Stock the way you work.
A one-off floor and a crew pouring garages every week should not buy the same way. These three tiers are where the conversation starts, and the actual order and checkout happen in our shop.
Job Kit
Per JobFor the one-off floor
- Everything for a single pour
- Matched base, color and topcoat
- Owner walks you through it
- Ships nationwide, or pick up in Tracy
Pro Crew
VolumeFor the working installer
- Volume pricing across every line
- Priority on the bench
- First look at new systems
- Seat at the training academy
Shop Account
WholesaleFor the crew that runs daily
- Standing wholesale terms
- Custom flake blends to spec
- Stock held for your schedule
- Direct line to the owner
Get in touch
Tell us what you're pouring.
Anything from one bucket to a standing wholesale account, pickup or freight, or a seat in training. A person who has poured this material reads every message.
- (209) 208-4656
- chris@exclusiveresinsupply.com
- 392 W Larch Rd, Suite 11, Tracy, CA 95304
Stocking a job in San Francisco?
Tell the owner the slab, the look, and your quantities. We will spec it and get it to you.
Need it installed?
Our sister company, Exclusive Resins, installs epoxy, flake and metallic floors across the Central Valley, out of the same Tracy building.